I rarely make use Embroidery digitizing services of the material known as tulle. I don’t really think about it because my daughters are no longer interested in princesses and tutus. However, tulle can be used for machine embroidery in a variety of ways. It can improve an embroidered or appliqued item by stabilizing it. Alternately, you can embroider tulle itself. So, here’s how to embroider on tulle and some ideas for machine embroidery projects with tulle.

What’s tulle?

Who hasn’t heard of tulle? The fabric that is used to make ballet tutus is this one. Although the tulle has holes that are larger than those of the mesh, it is actually a type of mesh. On a 6″ wide spool, you can purchase the tool at the yard, any fabric store, or online.

Embroidering on tulle would make no sense at all.

Tulle is a popular choice for princess dresses, bridal gowns, and prom gowns due to its exceptional quality. Tulle embroideries appear opulent, which is why you typically see them on dress and formal attire.

Additionally, the tool is rigid, allowing you to fold it together to create volume. The flaws in tutus stem from this. To give dresses a little more oomph, tulle is frequently used as an underlayer.

Due to its semi-transparent nature, the tool is frequently layered with other materials. You can see the other garment underneath when you put it on top of it. You can, of course, strategically apply or embroider areas of the tulle to cover up skin patches and then let the skin show through the tulle if you want to make something really edgy.

Why is embroidering on tulle so difficult?

Because the material is so light and prone to tear, the tool makes machine Embroidery digitizing difficult. It is also very porous, making it difficult for embroidery to “cut.” Therefore, in order for the stitches to remain, you must stabilize the tool with a material that can provide stability while you sew and then vanish after you are finished.

Because tulle also tends to gather, you must keep it in place while embroidering on it. Because the material is too porous to hold the pins, it is impossible to pin it in place. Additionally, pins may cause cracking.

Techniques for Embroidering Tulle:

The materials used to embroider Tulle are listed below.

Trolls Stabilizer, embroidery hoop, embroidery machine, and scissors a washable stabilizer (rather than a film-like, water-soluble topping).
Needle: I utilized a Schmitz 75/11 embroidery needle.
Thread: I used white pre-wound 60 wt thread for the bobbin and 40 wt polyester embroidery thread for the top thread. Naturally, you should match your top and bobbin threads.)

The ideal Tulle stabilizer is:

A wash-away stabilizer is the best stabilizer for tulle embroidery because of its transparency.

Because the stabilizer will still be attached to the tulle after embroidery, it is not a good idea to use a cutaway or no-show mesh stabilizer. Additionally, if the tearaway stabilizer is missing, it will not function properly because tearing it could cause damage to the delicate stitches and fabric.

When Embroidering on Tulle, Choosing the Right Tulle:

With tiny holes, tulle is a delicate, sheer, flowing net-like fabric. It is transparent, comes in a wide range of colors, and it can be matte, glossy, or something else entirely. It can be found in everything from cute tutus and toddler dresses to elegant evening gowns and bridal veils.

Nylon, polyester, or silk are some of the different materials used to make tulle. The properties of tulle vary depending on the material, and embroidering tulle can be simpler or more challenging. For this beginner embroidery tutorial, I used nylon tulle, the most common type of tulle.

If you are interested in giving machine embroidery on tulle a shot for the first time, I would suggest starting with a tulle that is less delicate and has smaller holes before moving on to a tulle that is more luxurious. If you want to embroider on tulle, the more delicate and expensive types look especially good.

Embroidery Tips for Tulle:

The pattern must be dense enough to show through the tulle but not so dense that it tears the stabilizer or damages the tulle. Designs that only use running stitches, for instance, will not work because the stitches will have trouble adhering to the tool fibers that are spaced apart. On the other hand, fill stitch designs that are too big and dense run the risk of damaging the tulle fibers, resulting in design puckering or stabilizer tearing.

Use the smallest possible hoop size for your embroidery design. When I got lazy and embroidered multiple snowflakes at once, they didn’t look as good as one snowflake in my smallest hoop.

Add a stabilizer if your tool is very delicate. The next step is to press the tulle onto the hooped stabilizer after spraying a thin layer of a temporary fabric adhesive like Odif 505 on it. Pin only in extreme cases. The tool gathers more when it is floating than when it is hooked, which is why I prefer hooping. Additionally, spraying adhesive on fabric with holes was too messy!

When attempting to troubleshoot embroidery on new fabrics, the sewing speed should generally be slowed down. This way, my projects run more smoothly and I can catch errors before they get too far!

Quick Guide to Embroidering on Tulle:

Consider using a water-soluble fabric pen or even a straightforward embroidered space sticker to mark your tulle for design space.

Wrap your Wash-A stabilizer and tool in your embroidery hoop at this point. Keep in mind to use the smallest hoop you can find and to hoop the stabilizer and fabric very tightly so as not to make the tulle look distorted.

Because the hoop was too loose, my first attempt at machine embroidery on tulle turned out much better than I had anticipated.

After that, carefully insert your embroidery hoop into your machine and choose your embroidery design. Make sure you get the right orientation and the right needle and thread.

Press Start after setting the machine to a slow swing speed! Make sure you don’t get any tears or rips by keeping an eye on the machine.

Trim any jump threads when finished. The front of my design is shown below! How cool is that?

The back is then presented here. Imagine doing that fifteen times on a tulle cape.

Remove the stabilizer and embroidery floss from the hoop gently after admiring them.

The stabilizer should be clipped to the right, close to the design. This will make washing it simpler.

Finally, dip your tool in water to remove the Wash-A stabilizer. It might take a few minutes for it to dissolve. If you decide to submerge the design in a stream of water, be careful. Your delicate stitches could be ruined by this!

Let the tool dry after the stabilizer is completely dissolved, and that’s it! Check ZDIGITIZING Embroidery digitizing services.

Conclusion:

I hope this tutorial has given you some pointers on how to embroider on tulle and given you ideas for new ways to be creative!